![프로그램 컨트롤러 Programmable Controller temp2500 drawing]()
![GR200]()
![Hybrid Recorder]()
Programmable Controller
Controller
- 표시부와 제어부 분리가능
- 온도1채널(가열/냉각 지원)
- 사진처럼 선명한 화질(640 X 480,TFT)
- 18bit A/D 컨버터를 통한 고정밀 제어
- PID 그룹의 세분화
- 고감도 터치방식 인터페이스
- 한 세그먼트당 최대 운전시간 999시간 59분 59초
- DI16점, DO 12점 기본제공, Digital Output 32점(12+20) 접점 출력으로 사용 가능
- 강력한 통신 속도 115.200bps의 빠른 통신 속도 제공
- 사용자 화면 구성 지원
- 디지털 레코더 기능
- SD 메모리 카드 지원
- VESA 마운트 지원
- 무상제공 되는 PC Software 및 언어 지원(한글, 영어, 중국어, 일어, 러시아어)
| Group | Specification | ||
|---|---|---|---|
| Display | Display | 5.7” TFT-LCD | |
| Screen Resolution | 640(W) x 480(H) | ||
| Language | KOR/ENG/JPN, KOR/ENG/CHN, KOR/ENG/RUS | ||
| Font | 3 Font (HEAD/NORM/ART | ||
| Start Page | Support user`s start page | ||
| User Screen | 16 customized user screen for screen saver | ||
| Mount Method | Panel mount, VESA mount(MIS-D 75) | ||
| Control Mode | TEMP 1CH : Heat and Cool Support | ||
| Max Channel | 1 Channel | ||
| Pattern & Segments | 80pattern / Max 1200 segments , Max 999hour 59Min 59Sec can be set | ||
| Input | TC | K, J, E, T, R, B, S, L, N, U, W, PL, C, | |
| RTD | Pt100(JIS/IEC), JPt100(JIS) | ||
| Analog Voltage Input | 0.4V~2V DC, 1~5V DC, 0~10V, -10~20 mV DC,1~100 mV DC(4~20 mA , 0~20 mA, External Resistance 250Ω, 500Ω) | ||
| Output | Control Output | 1 Channel MV(0~100%) | |
| Current Output | 4~20mA DC(Load Resistance : Max 600Ω) | ||
| Voltage Output | 24V DC(pulse width : Minimum5ms) | ||
| Transmission Output | 1 Channel (PV, SP, MV) | ||
| Digital Input | Contact Type | RUN/STOP/HOLD/STEP by DI, Pattern Number, Delay time of detecting DI error, Trouble Input by DI, Available to customize DI error | |
| Contact capacity | Max 12V DC, 10mA | ||
| Digital Output | Relay | C contact | Normal Open 30V DC 5A, 250V AC 5A Normal Close 30V DC 1, 250V AC 2A |
| A contact | Normal Open 30V DC 3A, 250V AC 3A | ||
| Open Collector | ON voltage across contacts at less than 2V, the leakage currentless than 100 ㎂ | ||
| Sampling Time | 250ms | ||
| Accuracy | ±0.1% of FS ±1 digit | ||
| PID Control | PID group | 6 group(Zone PID 6 group or Deviation PID 1 group or Seg PID 6 group) | |
| PID type | Zone PID, Dev PID, Seg PID | ||
| Communication | Interface | Flexible to change between RS485/RS232C by Dip switch, Max. 31 nodes. | |
| Protocol | PC Link(Checksum), MODBUS(RTU,ASCII), Sync-Master(CH1,CH2 selectable) | ||
| Speed | Max 115,200 bps, Support Ethernet | ||
| Data Back-Up | Object | SDCard, MMC Card(FAT32 format) | |
| Functions | Back-up and restore data of Program Pattern / Parameter Settings, and SP/PV/MV vaule | ||
| Power Supply | Power | 24VDC | |
| Power Consumption | 22VA Max | ||
| Operating environment | - | ||
| Weight | - | ||
Digital Recorder
Options
- 5.7인치의 터치 스크린(640x480 TFT-LCD)
- 범용 입력 단자( Thermocouple, RTD, VDC)
- View 모드 선택가능
- 80MB 내장 메모리와 SD/SDHC 메모리 카드 사용 가능
- RS485/422 통신 모듈(Modbus, PC-link)
| Suffix Code | ||
|---|---|---|
| Model | Code | Information |
| GR200 | Graphic recorder(applied touch panel function) 145(W)×145(H)mm / 5.71x5.71'' | |
| Input channel | 2 | 2 channels |
| 4 | 4 channels | |
| 8 | 8 channels | |
| 12 | 12 channels | |
| Model | GR200 |
|---|---|
| Number of channels | 2, 4, 8, 12 (Refer to the type configuration) |
| Input type | 2 thermoresistors (Pt-100, KPt-100) 12 thermocouples (K, J, E, T, R, B, S, L, N, U, Wre 5-26, PL-II) 4 VDC (-10 - 20 mV, 0 - 100 mV, 1 - 5V, 0 - 30 V) |
| Sampling period | 250 ㎳ |
| Current to measure the thermoresistor (RTD) | About 0.21 ㎃ |
| Input resistor | Thermocouple : More than 1 ㏁, VDC : More than 1 ㏁ |
| Allowable wiring resistor | Thermoresistor : Maximum 100Ω/wire (The RTD is up to 10Ω/wire for the range of -100.00 - .150.00) Thermocouple : Less than 200 Ω VDC : Less than 2 ㏀ |
| Impact of the wiring resistor | Thermoresistor : ±0.3 °C/10 Ω (The 3 lines have the same wiring resistors) |
| Allowable input voltage | Thermocouple : Less than ±10 V DC, VDC : Less than ±33 V DC |
| Degree | ±0.15 % of F.S, ±1 digit (Except the RJC temperature error) ※ Refer to the input table |
| The error in the reference junction compensation (RJC) | ±2.0 ℃ (0 ~ 50 ℃) |
| Sensor short detection (Burn-out) | UP-Scale for the short |
Hybrid Recorder
Options
- 50mm 열전사 방식 페이퍼 기록계
- 페이퍼 없이도 기록 가능한 데이터 로거 기능 구현
- RS485 통신과 전용 통신포트 지원으로 PC/PLC를 통해 실시간 모니터링 및 파라미터 설정 가능
- 0.2%급 고정도 멀티 입력 (RTD, TC, 전압, 전류(shunt)
- 그래프 모드, 디지털 모드 2채널 동시 기록
- LCD 도트 메트릭스 채용으로 시인성과 설정 편의성 제공
- 다양한 옵션 입/출력 기능 제공
- 소형(W96×H96×L100mm / 3.78x3.78x3.94''), 경량화 구현
| Record accuracy | ±0.5%F.S. | |
|---|---|---|
| Alarm output | CH1(AL1, AL2), CH2(AL1, AL2) Relay out put(250 VAC/30 VDC 3 A 1 a) | |
| Alarm output hysteresis | ON/OFF interval setting for alarm output: 1 to 999digit variable | |
| Communication output | RS485 communication output(Modbus RTU protocol) | |
| Set method | Setting by front keys | |
| Sampling cycle | 500 ms/channel x 2 channels = 1000 ms | |
| Dielectric strength | 2300 VAC 50/60 Hz for 1 min.(charging terminal of the other polarity) | |
| Vibration | 0.75 mm amplitude at frequency of 10 to 55 Hz (for 1 min.) in each of X, Y, Z directions for 1 hour | |
| Relay life cycle | Mechanical: Over 5,000,000 operations, Electrical: Over 100,000 operations | |
| Insulation resistance | Over 100 MΩ (at 500 VDC megger) | |
| Noise resistance | Square shaped noise by noise simulator (pulse width 1 ㎲)±2 kV | |
| Method | Direct thermal line print | |
| Resolution | 8 dot/mm | |
| Dots | 384 dot/Line | |
| Life cycle | 50 km | |
| Record | Graphic mode | • Record speed(recording paper speed): 10, 30, 60, 120, 240, 480, 940 mm/hour • Memo cycle: 30 s, 1 m, 5 m, 10 m, 15 m, 30 m, 1 h, 2 h, 3 h, 4 h, 8 h, 16 h, 24 h |
| Digital mode | TEXT mode record cycle: 00 m 05 s to 99 m 59 s | |
| Paper | Thermal Direct Receipt Paper (57 mm x 16 m) | |
| Paper supply method | Clamshell Type | |
| Language | Korean, English | |
| Environment | Ambient temperature | 0 to 50 ℃, storage: -20 to 60 ℃ |
| Ambient humidity | 35 to 85%RH, storage: 35 to 85%RH | |
| Approval | CE | |
| Unit weight | Approx. 700 g | |